Planet IPOE-E174 Manual do Utilizador Página 1

1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE ExtenderIPOE-E174User’s Manual

101.5 Power over Ethernet BudgetThe following table lists how many PoE devices can be powered by IPOE-E174:Power SourcePoE Output Budget*Max. Number

112. InSTALLATION2.1 Physical DimensionsIPOE-E174 1-port Ultra PoE to 4-port 802.3af/at Gigabit PoE Extender dimensions (W x D x H): 135 x 87.8 x 56

122.2 Front PanelFigure 2-1 shows the front panel of Industrial Power over Ethernet ExtenderIPOE-E17412344-Port PoE ExtenderPoE PowerUsage (%)75PWRMi

13 PoE Input PorLED Color FunctionLNK/ACT GreenLight to indicate the port is linked up.Blink to indicate that the IPOE-E174 is actively sending or re

142.3 Mounting InstallationThis section describes how to install the Industrial Power over Ethernet Extender and make connections to it. Please read

15Please refer to the following procedures to remove the Industrial Power over Ethernet Extender from the track.Step 3: Lightly remove the DIN rail f

16Step 3: Use the screws to screw the wall-mount plate on the Industrial Power over Ethernet Extender.Step 4: Use the hook holes in the corners of th

17Step 2: The PSE delivers both Ethernet Data and PoE power over UTP cable to the IPOE-E174 and the “PoE IN” LED will be lit steadily.Note1. When th

18Step 3: Once the IPOE-E174 detects the existence of an IEEE 802.3at/af device, the “PoE In-Use” LED indicator will be lit steadily, showing it is pr

193. Customer SupportThank you for purchasing PLANET products. You can browse our online FAQresource and User’sManualon PLANET Web siterst

Table of Contents1. Introduction ... 3 1.1 Packet Contents ...

31. Introduction1.1 Packet ContentsThank you for purchasing PLANET IPOE-E174- 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender. Open the bo

41.2 Application DiagramThe IPOE-E174 is designed as the repeater to forward both Gigabit Ethernet data and IEEE 802.3at PoE power, thus extending th

51.3 Key Features  Physical Port  5-port 10/100/1000BASE-T Gigabit RJ45 interface  1-port data + power input  4-port data + power output  Power

6  Automatic address learning and address aging  Supports CSMA/CD protocol  Industrial Case / Installation  IP30 aluminum case protection  DIN r

71.4 TechnicalSpecicationsModel IPOE-E174HardwareSpecicationsNetwork ConnectorPoE In Port1 x 10/100/1000BASE-T Ethernet with ultra PoE “Data + DC

8LED DisplaySystem: PWR (Green)Power Input: Midspan in (Green)Power Input: Endspan in (Green)PoE Power Usage (%): 25 (Green)PoE Power Usage (%): 50 (G

9PoE PowerPoE in Port50~57V DC, max. 60 wattsPer PoE out Port44~55V DC, max. 30.8 wattsPower Pin AssignmentPoE in Port1/2(+), 3/6(-); 4/5(+), 7/8(-)Pe