
Step 1. Go to Network > Interface and then set as below:(Figure 3-19)
Click Port1’s Modify button.
Select LAN for Interface Type.
Select NAT Routing for Connection Type.
Enter the IPv4 Address and the Netmask.
Tick Ping, HTTP and HTTPS.
Click OK.
Figure 3-19 LAN Interface Settings
Step 2. Under Network > Interface, set as below:(Figure 3-20)
Click Port3’s Modify button.
Select DMZ for Interface Type.
Select Transparent Bridging for Connecion Type.
Tick Ping, HTTP and HTTPS.
Click OK.
Comentários a estes Manuais