Planet CS-2001 Manual do Utilizador Página 52

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 848
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 51
41
2.3 Multiple Subnet
2.3.1 Using NAT / Routing Mode For LAN Users to
Access the Internet
Prerequisite Setup (Note: IP addresses used as examples only)
Configure port 1 as LAN1 (192.168.1.1, NAT routing mode) and connect it to the
LAN which is using the IP address range 192.168.1.x/24.
Configure port 2 as WAN1 (10.10.10.1) and connect it to the ISP router (10.10.10.2);
the IP address range distributed by the local ISP is 162.172.50.0/24.
Packets traveling to an external network via Port2, which has a private IP address of
10.10.10.1, map to the real IP address 162.172.50.1 using NAT. This allows the
signiature definition file to be updated via the Internet.
Configure port 3 as WAN2 (211.22.22.22) and connect it to the ADSL Termination
Unit Remote (ATUR) to access the Internet.
Step 1. Under System > Configuration > Multiple Subnets, set as below:Figure
2-8
Fill in the Name field.
Interface: Select Port1 (LAN1)
IP Version: Select IPv4.
IP Address: Type “162.172.50.1”
Netmask: Type “255.255.255.0”
Click OK.Figure 2-9
Vista de página 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 847 848

Comentários a estes Manuais

Sem comentários